
Modesto Gate Pros: Farm, Ranch & Driveway Gate Installation, Automation and Repair for Homes, Ranches and Businesses
Residential, agricultural, and commercial gate design, fabrication, automation, and repair. Wrought iron, ornamental steel, aluminum, wood, and vinyl gates built, wired, and serviced across Stanislaus County by a licensed, insured crew. Se habla espanol.
- ✓Licensed & Insured
- ✓20+ Years of Experience
- ✓Free On-Site Estimate
- ✓Se Habla Español
Modesto Gate Pros is a licensed and insured gate contractor with over 20 years of experience designing, fabricating, automating, and repairing gates for residential, agricultural, and commercial properties in Modesto, CA.
Our work covers automatic driveway gates and electric gate openers, farm and ranch entrances, custom wrought iron and ornamental steel gates, powder-coated aluminum gates, cedar and redwood gates on welded steel frames, vinyl and composite gates, single and dual swing gates, rolling and cantilever sliding gates, garage security gates and roll-down grilles, custom estate entrances, security fencing, and in-house welding and fabrication.
On the electronics side we install, program, and repair gate operators from LiftMaster, DoorKing, FAAC, Ramset, US Automatic, and Mighty Mule, plus solar power packages, telephone entry systems, keypads, card and fob readers, video intercoms, exit loops and loop detectors, photo-eye sensors, battery backup, and Knox box fire-department access.
Every operator we hang is set to UL 325 safety compliance with the correct Class I through Class IV classification for the property, two independent means of entrapment protection wired and tested, and force limits measured rather than cranked to maximum.
Steel that lives outdoors in an irrigated valley wants a real coating system, so we hot-dip galvanize or zinc-prime and then powder coat, we build in 14-gauge and 16-gauge tube depending on span and operator load, and we set posts below the hardpan so a gate does not drop out of square in its third winter.
Modesto Gate Pros holds the D-28 Doors, Gates and Activating Devices classification regulated by the California Contractors State License Board, carries full liability insurance and a bond, is a member of the International Door Association, and backs every gate, operator, and access system with a written workmanship warranty.
Why Modesto Chooses Modesto Gate Pros
- ✓Over 20 years building and automating gates across Stanislaus County and the valley
- ✓In-house metal shop — we weld and powder coat our own gates instead of drop-shipping panels
- ✓Farm, ranch, and orchard entrances built for tractor and trailer clearance, not car clearance
- ✓Solar operators sized to your real cycle count where there is no power at the road
- ✓Galvanized or zinc-primed under powder coat, because irrigation and fog are what rust a gate here
- ✓Every operator wired to UL 325 with photo eyes, loop detectors and tested entrapment protection
- ✓Licensed, insured, and bonded, with a written workmanship warranty
- ✓Se habla español
About Modesto Gate Pros in Modesto, CA
Modesto Gate Pros has spent over 20 years building, automating, and repairing gates across Modesto, Stanislaus County, and the surrounding valley.
We started as a small metal shop taking whatever welding work came through the door, which in this part of California means a lot of orchard equipment, dairy hardware, and gates that had been hit by something with a PTO shaft.
That is still the backbone of the business: we run our own crews, weld and finish our own gates, and we would rather build one entrance properly than subcontract three.
Building for this valley means building for water and for work. Irrigation, winter fog, and dew give a coating far more opportunity to fail here than most people expect, so everything gets blasted and primed, hot-dip galvanized or zinc-primed where the exposure warrants it, and powder coated inside and out with weep points drilled and sealed.
Posts get set below the hardpan layer rather than in a shallow hole that looks fine until the second wet winter. And we size gates for the vehicles that actually use them, which on a working property means a tractor and a trailer rather than a sedan.
The other thing that matters here is power, or the lack of it. Long orchard and ranch driveways very often have no service at the road, and trenching one at $10 to $25 a foot costs more than the gate.
That makes a properly sized solar operator a real service rather than an upsell, and we size the panel and battery to your actual cycle count instead of selling a kit.
From wrought iron and ornamental steel to aluminum, wood, vinyl, sliding, swing, cantilever, farm, and estate gates, plus operators, keypads, telephone entry, safety sensors, and security fencing, Modesto Gate Pros is one call for an entrance that works every time you pull up to it. Se habla espanol, and the on-site estimate is always free.
Our Gate Services in Modesto, CA

Driveway Gates
Out here the gate is not near the house. It stands at the county road, often several hundred feet away, and every hard decision about a Modesto driveway gate comes out of that distance.

Swing Gates
A dual swing pair is the traditional Central Valley entrance and it is still the right answer on plenty of properties. What decides it is not the depth of the driveway.

Sliding & Rolling Gates
Rolling gates suit valley properties because they need no swing room and they handle wide openings comfortably. The question we work through on every job is whether the gate should ride on the ground or hang clear of it.

Wrought Iron Gates
Iron is what most valley owners picture at the end of a long drive, and it is a fine choice. What we spend our time on is the bottom eighteen inches, because that is where every iron gate around Modesto actually dies.

Ornamental Steel Gates
Ornamental steel gets you the look of iron at a lower price, and on the wide openings this valley needs, the saving is significant. The catch is that a wider gate is a great deal less forgiving of a thin frame.

Aluminum Gates
Aluminum is underrated on valley properties, and the strongest argument for it is one nobody makes in a showroom. On a solar gate, a lighter leaf directly shrinks the panel and the battery you have to buy.

Wood Gates
A wood entrance suits a valley ranch better than anything else does, and it asks more of you than anything else does. Dry heat, hard sun and a gate you cannot see from the house are a combination worth understanding before you order one.

Vinyl & Composite Gates
Vinyl and composite gates have a place on valley properties, and it is a narrower place than the brochures suggest. The deciding question is simple: does anything with real body weight lean on this gate?

Cantilever Slide Gates
Cantilever is the gate this valley should be buying, and the reason has almost nothing to do with the gate itself. It is what is missing: there is no track across the driveway to fill up with dirt.

Automatic Gate Openers & Operators
An operator at the end of a long Modesto driveway lives a harder life than one beside a house. Nobody sees it, nobody hears it struggling, and everything that goes wrong has usually been going wrong for a while.

Access Control & Keypads
The keypad at a valley gate has to work for people you will never meet. The propane driver, the huller crew, the irrigation tech and the vet all need to get through, and none of them should be using your code to do it.

Telephone Entry & Video Intercoms
The whole point of an intercom out here is that you cannot see the gate. Somebody is standing at the road, several hundred feet away, and you are in the kitchen with no idea who they are or what they want.

Safety Sensors & UL 325 Compliance
A gate on a ranch falls under the same standard as a gate in a subdivision, and the reason has not changed. A powered gate is a heavy machine that moves through a space where people stand, and distance from town does not soften that.

Solar Gate Motors & Battery Backup
Solar is not an upsell on a Modesto property, it is frequently the cheaper build. A great many driveways here start hundreds of feet from the nearest service point, and the trench is the expensive part of the job.

Custom & Estate Gates
On a valley property the entrance is often the only part of the place a passer-by ever sees. The house sits back behind an orchard or a windbreak, so the gate carries the whole impression of the property by itself.

Garage Gate Installation
On a valley property the building worth securing is usually not the garage. It is the shop, the equipment barn and the implement shed, and they sit a long way from the house with a great deal of value inside them.

Security Fencing & Perimeter
Perimeter fencing on acreage is a budget problem before it is a security problem. Cost is per foot, the runs are long, and the honest advice is usually to spend the money where it does something rather than spread it evenly.

Commercial & Industrial Security Gates
Commercial gate work in this valley mostly means agriculture at industrial scale: hullers, dryers, dairies, cold storage, packing sheds and the truck yards that serve them. The demands are seasonal and they are severe.

Farm & Ranch Gates
A farm gate has two jobs that pull against each other. It has to let a wide machine through without anybody thinking about it, and it has to hold an animal that has all day to work on the latch.

Welding & Gate Fabrication
We keep our own shop and our own trucks, and on valley work that second half matters as much as the first. A thirty-six-foot cantilever leaf is not something you haul back into town to have one corner re-welded.

Commercial, Agricultural & Industrial Gate Services in Modesto
We install, automate, and maintain commercial, agricultural, and industrial gates for food processing plants, dairies, packing sheds, distribution centers, contractor yards, self-storage properties, apartment communities, and municipal sites across Stanislaus, San Joaquin, and Merced counties.
Heavy cantilever slide gates on 14-gauge frames, Class III and Class IV operators, telephone entry with directory codes, card and fob readers, exit and safety loops, roll-down security grilles, and Knox box fire-department access, all wired to UL 325 and kept inspection-ready so your site stays secure and trucks keep moving.
- ✓Food processing plants & packing sheds
- ✓Dairies, ranches & agricultural yards
- ✓Distribution centers & truck yards
- ✓Cantilever slide gates for wide openings
- ✓Telephone entry, card readers & keypads
- ✓Class III/IV operators wired to UL 325
- ✓Knox box fire-department access
- ✓Scheduled maintenance contracts
Recent Projects Across the Central Valley




How It Works
- 1. Design & site check. We measure the opening, shoot the grade, find out what power actually reaches the gate, and check turning clearance for whatever the biggest vehicle on the property is. On a ranch that is usually a tractor and a trailer, not a sedan. You get an itemized quote, not a number scribbled on a business card.
- 2. Fabrication & finish. We cut and weld the gate in our own shop, blast and prime it, and powder coat it inside and out. Posts get set in concrete below the hardpan layer, and we trench conduit for the operator, exit loop, and access control while the gate is being built.
- 3. Install & automate. We hang the gate, mount and align the operator, wire the keypad, exit loop, and photo eyes, then program remotes and set travel and force limits to UL 325. On properties with no service at the road we size and mount the solar panel, charge controller, and battery instead.
- 4. Test & hand off. We cycle the gate dozens of times, test entrapment protection with a real obstruction, walk you through the manual release and battery backup, and leave the manuals with you. We will do the walkthrough in English or Spanish, whichever is easier.
What Modesto Customers Say
They built a 16-foot ranch entrance on a welded frame and set it up on solar since we have no power at the road. Two winters in and it has not missed a cycle. Everything explained in Spanish for my dad too.
Our old tube gate sagged so badly the latch had not lined up in years. They set new posts deep, built a rigid frame, and automated it. The gap is even top to bottom now and the tractor clears it fine.
We manage a processing yard and needed a cantilever gate that could take a truck cycle count. They sized the operator properly, put in loops, and gave us a written safety report. First company that measured before quoting.
The iron gate they built matches our porch rail almost exactly. They took a photo of the old pattern and reproduced it. Powder coat still looks new after a full year of sprinklers hitting it.
Operator board died during harvest week and they had it replaced the same day, then reprogrammed all the remotes and the keypad. They also found a photo eye that had never been wired right.
Got three bids for an automatic driveway gate. These were the only ones who checked the slope and the power at the gate first. No surprises on the invoice and the crew cleaned up after themselves.
Service Areas
Modesto Gate Pros serves Modesto, CA and surrounding communities including:
Frequently Asked Questions
How much does a driveway gate cost in Modesto?
Most driveway gates here run $2,500 to $8,000 and up installed before automation. A single plain tube-steel or aluminum swing gate sits at the low end, a wide dual-swing custom iron entrance at the top.
Automation is the other half of the budget: opener hardware alone is $500 to $1,500, and a single swing operator installed with power, photo eyes, and a keypad typically lands between $1,800 and $4,500. A plain galvanized farm gate on properly set posts is a different product entirely and usually falls between $400 and $900.
Can you build a gate for a farm or ranch entrance?
Yes, and it is a large share of what we do. The important thing to know is that a stock galvanized tube gate is not a good automation candidate, because those gates are light and flexible by design and an operator will flex the frame rather than move the gate cleanly.
If you want an automated ranch entrance, you want a rigid welded frame in a plain ranch or vertical-picket style, hung on posts sized for the span. That runs roughly $1,800 to $4,000 installed and it will still be working in twenty years.
What if there is no power at my gate?
Then solar is almost certainly the cheaper answer. Trenching a service feed out to a gate runs $10 to $25 per foot, so on a 400-foot orchard driveway you are looking at $4,000 to $10,000 before you have bought a single component.
A solar package adds roughly $400 to $1,200 over a standard operator, and we size the panel and battery to your real cycle count rather than to a brochure number. On a working ranch with a high cycle count we will tell you when solar is not the right call.
What is UL 325 and does my gate have to meet it?
UL 325 is the safety standard for powered gate operators. It requires two independent means of entrapment protection on most installations, the correct Class I through Class IV classification for the property type, and warning signage. Every operator we install is set up to it, and if we find your existing gate running with the photo eyes disconnected and the force cranked to maximum, we will tell you plainly rather than quietly leaving it that way.
Do gates rust in the Central Valley?
Bare steel does, and the reason is water rather than salt. Sprinkler and flood irrigation, winter tule fog that keeps everything damp for weeks, and the daily dew cycle all give a coating plenty of opportunity to fail at chips and cut edges. Rust usually starts inside the tube where nobody looks.
Hot-dip galvanizing or a zinc-rich primer under a powder coat, plus drilled and sealed weep points, is what actually stops it. A brush-painted gate is a maintenance schedule, not a finish.
How long does a gate installation take?
A typical residential gate and operator goes in over one to three days once the gate is fabricated, and fabrication usually runs two to four weeks. Custom iron and heavy commercial cantilever gates take longer to build. Concrete for posts wants about seven days before we hang a heavy leaf on it, and we will not rush that. We give you a schedule at the quote and tell you if it slips.