Every Gate Service We Offer in Modesto, CA
One team for every gate job in Modesto — from driveway gates to welding & gate fabrication.
Modesto Gate Pros handles residential and commercial gate projects across Modesto and the Central Valley. From driveway gates to welding & gate fabrication, every service below is handled by our own team and backed by our workmanship guarantee.
Start on the Modesto Gate Pros homepage, read what people in Modesto say on our about page, or call (844) 511-2320 and describe what you need in your own words.
Driveway Gates
Driveway gates change how a property reads from the road and, on a Central Valley parcel, they also have to survive irrigation, fog, and whatever the biggest vehicle on the place is trying to squeeze through. We design, fabricate, automate, and repair driveway gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, from a 12-foot single swing leaf to a 30-foot cantilever slide.
Swing Gates
Swing gates are the default driveway gate whenever the ground is reasonably flat and there is arc room behind the opening, which describes most of the valley floor. We build single and dual swing gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, hung on hinge posts sized for the leaf rather than borrowed from the fence line.
Sliding & Rolling Gates
Sliding gates are the right call when the driveway climbs, when there is no arc room for a leaf, or when a vehicle would otherwise have to stop in the road while the gate opens. We build and repair rolling V-track slide gates and cantilever slide gates in steel and aluminum, with sealed-bearing rollers and track designed to shed the dirt that a working property generates.
Wrought Iron Gates
Wrought iron gates are the entrance most Modesto homeowners picture first, and they are the ones most often built from stock too light to hold their shape. We forge and weld custom wrought iron and ornamental iron driveway gates from solid bar and heavy-wall tube in our own shop, then blast, prime, and powder coat them inside and out before they ever go on a truck.
Ornamental Steel Gates
Ornamental steel gates give you the mass and presence of iron at a lower price and with a lighter leaf for the operator to move. We fabricate ornamental steel driveway and ranch gates from square and rectangular tube in 14-gauge and 16-gauge wall, welded and finished the same way we finish iron, then matched to an operator running comfortably below its rated load.
Aluminum Gates
Aluminum gates do not rust and weigh roughly a third of what steel does for the same dimensions, which in an irrigated valley is worth more than it sounds. We build welded aluminum driveway and ranch gates from 6061 and 6063 extrusion, not the bolted thin-wall panel kits that gave aluminum its cheap reputation in the first place.
Wood Gates
Wood gates give a warmth that metal cannot match, and they need a welded steel frame underneath or they will sag before they are three years old. We build cedar, redwood, and composite-clad driveway gates on fully welded steel frames, so the steel carries the structure and the wood does the looking.
Vinyl & Composite Gates
Vinyl and composite gates are the low-maintenance choice for a property that wants privacy without a refinishing weekend every other spring. We build vinyl and composite driveway gates on welded aluminum or steel frames, with the panel material carried rather than load-bearing, which is the only way a vinyl gate stays flat through a valley summer.
Cantilever Slide Gates
Cantilever slide gates carry their weight on truck assemblies set back from the opening, so nothing crosses the driveway and nothing collects dirt. We build and service cantilever gates for processing plants, dairies, truck yards, contractor lots, and long ranch entrances, with counterbalance tails sized to the span and trucks rated well above the gate weight.
Automatic Gate Openers & Operators
Automatic gate openers are where most of a gate budget quietly goes, and where nearly every callback begins. We install, program, and repair LiftMaster, DoorKing, FAAC, Ramset, US Automatic, and Mighty Mule operators in linear arm, articulated arm, underground, and slide gate configurations, sized to the leaf rather than to the invoice.
Access Control & Keypads
Gate access control is the difference between a gate you actually use and a gate you leave propped open with a rock. We install keypads, exit loops, card and fob readers, long-range remotes, app-based controllers, and Knox box fire access, and the setup most Modesto properties really need lands at $400 to $1,500 on top of the operator.
Telephone Entry & Video Intercoms
Telephone entry systems let a visitor at the gate call your phone, which makes them the right answer for apartment communities, packing sheds, shared farm roads, and any property with more than a couple of households behind the gate. We install, program, and convert DoorKing, Linear, and Viking entry panels, including the cellular conversions that copper line retirement has forced on most of the valley.
Safety Sensors & UL 325 Compliance
UL 325 requires two independent means of entrapment protection on most powered gates, which means photo eyes or safety edges are part of a compliant installation and not an accessory line item. We install, test, and document photo-eye sensors, monitored safety edges, loop detectors, and correct Class I through Class IV operator classification on new gates and on existing ones that were never set up properly.
Solar Gate Motors & Battery Backup
Solar gate operators are a genuine service in this valley rather than an upsell, because a very large share of the driveways here start hundreds of feet from the nearest service point. We size and install solar gate motors with the panel, charge controller, and battery matched to your actual cycle count, and a solar package typically adds $400 to $1,200 over a comparable standard operator.
Custom & Estate Gates
Custom estate gates are fabricated to one opening, one grade, and one house, which is the entire point of them. We design and build arched, radius-top, and split-level estate entrances in wrought iron, ornamental steel, and aluminum, with matching pedestrian gates, columns, and fence runs so the entrance reads as one deliberate piece rather than three separate purchases.
Garage Gate Installation
Garage gate installation covers the opening a garage door alone leaves exposed, and it is the security addition we are asked about most on homes, shops, and parking structures. We install roll-up security grilles, side-folding and scissor gates, sliding garage security doors, and parking-garage entry gates and barrier arms, with the operators and access control to run all of them.
Security Fencing & Perimeter
A gate without a fence beside it is a very expensive suggestion, which is why perimeter fencing is half of most security jobs we quote. We install ornamental steel and aluminum picket fencing, welded wire panels, anti-climb mesh, and commercial chain link with privacy slats, tied into the gate so the entire line reads and functions as one continuous barrier.
Commercial & Industrial Security Gates
Commercial security gates have a different job than residential ones: far higher cycle counts, many more users, and a fire marshal who is going to look at them. We install and maintain heavy slide and swing gates, Class III and Class IV operators, barrier arms, and multi-user access control for food processing plants, dairies, distribution centers, truck yards, self-storage properties, apartment communities, and municipal sites across Stanislaus, San Joaquin, and Merced counties.
Farm & Ranch Gates
Farm and ranch gates are a different product from a residential driveway gate, and treating them as the same thing is how people end up with an expensive gate that does not work. We build ranch entrances, orchard access gates, livestock and pasture gates, and automated agricultural entries sized for a tractor and a trailer rather than for a sedan.
Welding & Gate Fabrication
Not every job is a whole gate, and our shop takes the metalwork nobody else wants to bid. We fabricate and repair gate frames, hinge posts, columns, handrails, window guards, dumpster enclosure gates, equipment brackets, and agricultural hardware in steel and aluminum, with MIG and TIG welding, in-house blasting, and powder coat finishing on the same equipment we use for our own gates.
What each of our services covers in Modesto
Open any service to see exactly what is included before you call.
Driveway Gates
Driveway gates change how a property reads from the road and, on a Central Valley parcel, they also have to survive irrigation, fog, and whatever the biggest vehicle on the place is trying to squeeze through. We design, fabricate, automate, and repair driveway gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, from a 12-foot single swing leaf to a 30-foot cantilever slide. Geometry decides the gate before style does.
- driveway gates
- gates for the driveway
- metal driveway gates
- steel gates for driveway
- driveway gate designs
- electric driveway gates
- residential driveway gate installation
- double driveway gates
- long driveway gate
- driveway gate posts and footings
- driveway gate repair
- driveway entrance gates
Swing Gates
Swing gates are the default driveway gate whenever the ground is reasonably flat and there is arc room behind the opening, which describes most of the valley floor. We build single and dual swing gates in ornamental steel, wrought iron, aluminum, wood, and vinyl, hung on hinge posts sized for the leaf rather than borrowed from the fence line. The economics are straightforward: no track to keep clean, no rollers to replace, no counterbalance tail, and a gate that is shorter than the opening it fills.
- driveway swing gates
- swinging driveway gates
- single swing gate
- dual swing driveway gate
- heavy duty hinges for driveway gates
- swing gate operator
- gate hinge replacement
- gate post repair
- swing gate sagging fix
- articulated arm gate opener
- underground swing gate operator
- swing gate clearance and slope
Sliding & Rolling Gates
Sliding gates are the right call when the driveway climbs, when there is no arc room for a leaf, or when a vehicle would otherwise have to stop in the road while the gate opens. We build and repair rolling V-track slide gates and cantilever slide gates in steel and aluminum, with sealed-bearing rollers and track designed to shed the dirt that a working property generates. There are two families and they behave very differently.
- driveway sliding gates
- rolling driveway gates
- driveway slide gates
- v-track slide gate
- slide gate rollers
- slide gate operator
- gear rack slide gate
- sliding gate track repair
- sliding gate installation cost
- sliding gate for sloped driveway
- roller gate wheels replacement
- slide gate safety loops
Wrought Iron Gates
Wrought iron gates are the entrance most Modesto homeowners picture first, and they are the ones most often built from stock too light to hold their shape. We forge and weld custom wrought iron and ornamental iron driveway gates from solid bar and heavy-wall tube in our own shop, then blast, prime, and powder coat them inside and out before they ever go on a truck. That distinction is the whole ballgame with iron.
- wrought iron gate
- wrought iron metal gate
- custom wrought iron gates
- ornamental iron driveway gates
- iron entrance gates
- wrought iron gate design
- black wrought iron gate
- arched wrought iron gates
- wrought iron gate repair
- repair iron gate
- iron gate re-welding
- hand-forged scrollwork and finials
Ornamental Steel Gates
Ornamental steel gates give you the mass and presence of iron at a lower price and with a lighter leaf for the operator to move. We fabricate ornamental steel driveway and ranch gates from square and rectangular tube in 14-gauge and 16-gauge wall, welded and finished the same way we finish iron, then matched to an operator running comfortably below its rated load. The difference between iron and ornamental steel comes down to how the material starts.
- ornamental steel gates
- steel gates for driveway
- tube steel driveway gate
- 14 gauge steel gate
- powder coated steel gate
- horizontal slat steel gate
- modern steel driveway gate
- galvanized steel gate frame
- steel picket gate
- steel gate repair
- steel gate fabrication
- pre-galvanized square tube gate
Aluminum Gates
Aluminum gates do not rust and weigh roughly a third of what steel does for the same dimensions, which in an irrigated valley is worth more than it sounds. We build welded aluminum driveway and ranch gates from 6061 and 6063 extrusion, not the bolted thin-wall panel kits that gave aluminum its cheap reputation in the first place. The weight difference is arithmetic, not marketing.
- aluminum driveway gates
- welded aluminum gate
- aluminum gate installation
- powder coated aluminum gate
- 6061 aluminum gate frame
- rust free driveway gate
- lightweight driveway gate
- aluminum privacy gate
- aluminum gate repair
- aluminum vs steel gate
- aluminum ranch gate
- aluminum pedestrian gate
Wood Gates
Wood gates give a warmth that metal cannot match, and they need a welded steel frame underneath or they will sag before they are three years old. We build cedar, redwood, and composite-clad driveway gates on fully welded steel frames, so the steel carries the structure and the wood does the looking. That construction detail is the entire difference between a wood gate that lasts and a wood gate that becomes a complaint.
- wood driveway gates
- cedar driveway gate
- redwood gate
- wood gate on steel frame
- wood privacy driveway gate
- wooden gate installation cost
- horizontal wood slat gate
- wood gate refinishing
- wood gate sagging repair
- composite clad wood gate
- wood gate automation
- wood and iron gate combination
Vinyl & Composite Gates
Vinyl and composite gates are the low-maintenance choice for a property that wants privacy without a refinishing weekend every other spring. We build vinyl and composite driveway gates on welded aluminum or steel frames, with the panel material carried rather than load-bearing, which is the only way a vinyl gate stays flat through a valley summer. Know what vinyl is before you buy it.
- vinyl driveway gates
- vinyl gate installation cost
- composite driveway gate
- pvc driveway gate
- vinyl privacy gate
- vinyl gate on aluminum frame
- low maintenance driveway gate
- vinyl gate sagging
- vinyl gate repair
- vinyl fence and gate
- composite slat gate
- uv stabilized vinyl gate
Cantilever Slide Gates
Cantilever slide gates carry their weight on truck assemblies set back from the opening, so nothing crosses the driveway and nothing collects dirt. We build and service cantilever gates for processing plants, dairies, truck yards, contractor lots, and long ranch entrances, with counterbalance tails sized to the span and trucks rated well above the gate weight. The no-ground-track design is why cantilever gates dominate commercial and agricultural work in this valley.
- cantilever slide gate
- cantilever gate installation
- commercial cantilever gate
- cantilever gate rollers
- truck assembly cantilever gate
- cantilever gate counterbalance
- no track slide gate
- agricultural yard gate
- cantilever gate repair
- gear rack slide operator
- heavy duty sliding gate
- cantilever gate post footings
Automatic Gate Openers & Operators
Automatic gate openers are where most of a gate budget quietly goes, and where nearly every callback begins. We install, program, and repair LiftMaster, DoorKing, FAAC, Ramset, US Automatic, and Mighty Mule operators in linear arm, articulated arm, underground, and slide gate configurations, sized to the leaf rather than to the invoice. Here is the one opinion we will push on anybody: spend on the operator and save on the design.
- automatic gate openers
- gate openers automatic
- automatic gate opening
- gate with automatic opener
- automatic electric gate openers
- gate electric opener
- automated driveway gates
- motorized driveway gates
- driveway gates automation
- liftmaster gate opener repair
- mighty mule gate opener repair
- electric gate opener troubleshooting
- automatic gate installation cost
Access Control & Keypads
Gate access control is the difference between a gate you actually use and a gate you leave propped open with a rock. We install keypads, exit loops, card and fob readers, long-range remotes, app-based controllers, and Knox box fire access, and the setup most Modesto properties really need lands at $400 to $1,500 on top of the operator. Start with getting out, not getting in.
- gate access control
- gate keypad installation
- driveway gate keypad
- card reader gate access
- fob reader gate entry
- exit loop driveway gate
- smartphone gate opener
- gate remote programming
- rotating guest codes gate
- keypad repair gate
- long range gate remote
- knox box gate access
Telephone Entry & Video Intercoms
Telephone entry systems let a visitor at the gate call your phone, which makes them the right answer for apartment communities, packing sheds, shared farm roads, and any property with more than a couple of households behind the gate. We install, program, and convert DoorKing, Linear, and Viking entry panels, including the cellular conversions that copper line retirement has forced on most of the valley. The copper problem is what brings most properties to us right now.
- telephone entry system
- gate call box installation
- doorking telephone entry
- cellular gate intercom
- video intercom gate
- apartment gate entry system
- hoa directory call box
- gate intercom repair
- lte gate entry conversion
- postal lock call box
- resident directory programming
- multi-tenant gate entry
Safety Sensors & UL 325 Compliance
UL 325 requires two independent means of entrapment protection on most powered gates, which means photo eyes or safety edges are part of a compliant installation and not an accessory line item. We install, test, and document photo-eye sensors, monitored safety edges, loop detectors, and correct Class I through Class IV operator classification on new gates and on existing ones that were never set up properly. The standard is straightforward once someone explains it.
- ul 325 gate compliance
- gate photo eye sensors
- gate safety edge
- entrapment protection gate
- class i class iv gate operator
- astm f2200 gate
- gate safety loop
- monitored safety device gate
- gate warning signage
- gate safety inspection
- photo eye alignment repair
- gate force limit adjustment
Solar Gate Motors & Battery Backup
Solar gate operators are a genuine service in this valley rather than an upsell, because a very large share of the driveways here start hundreds of feet from the nearest service point. We size and install solar gate motors with the panel, charge controller, and battery matched to your actual cycle count, and a solar package typically adds $400 to $1,200 over a comparable standard operator. The economics settle it before anyone talks about being green.
- solar gate opener
- solar powered driveway gate
- solar gate motor installation
- off grid gate operator
- gate battery backup
- dc gate operator solar
- solar panel gate kit
- charge controller gate
- agm battery gate opener
- no power at gate solution
- solar slide gate operator
- solar gate opener repair
Custom & Estate Gates
Custom estate gates are fabricated to one opening, one grade, and one house, which is the entire point of them. We design and build arched, radius-top, and split-level estate entrances in wrought iron, ornamental steel, and aluminum, with matching pedestrian gates, columns, and fence runs so the entrance reads as one deliberate piece rather than three separate purchases. The process starts with a drawing, not a catalog.
- custom estate gates
- luxury driveway gates
- arched entrance gate
- estate entry gate design
- custom gate fabrication
- monogram gate panel
- laser cut gate panels
- matching pedestrian gate
- gate columns and pilasters
- vineyard estate entrance
- orchard estate gate
- designer driveway gate
Garage Gate Installation
Garage gate installation covers the opening a garage door alone leaves exposed, and it is the security addition we are asked about most on homes, shops, and parking structures. We install roll-up security grilles, side-folding and scissor gates, sliding garage security doors, and parking-garage entry gates and barrier arms, with the operators and access control to run all of them. On a house or a farm shop, the usual job is a security grille or folding gate behind or in front of the main door.
- garage gate installation
- automatic garage gate opener
- garage security gate
- roll up security gate
- roll down garage gate
- side folding security grille
- scissor gate for garage
- parking garage gate
- parking barrier arm
- parking gate arm operator
- garage gate repair
- security screen garage door
Security Fencing & Perimeter
A gate without a fence beside it is a very expensive suggestion, which is why perimeter fencing is half of most security jobs we quote. We install ornamental steel and aluminum picket fencing, welded wire panels, anti-climb mesh, and commercial chain link with privacy slats, tied into the gate so the entire line reads and functions as one continuous barrier. Start with what the fence is actually for, because the answer changes the specification completely.
- security fencing installation
- ornamental steel fence
- aluminum picket fence
- perimeter security fence
- anti climb fence panels
- commercial chain link fence
- privacy slat fence
- welded wire security fence
- fence and gate matching
- pool code fence
- agricultural perimeter fencing
- property line fencing
Commercial & Industrial Security Gates
Commercial security gates have a different job than residential ones: far higher cycle counts, many more users, and a fire marshal who is going to look at them. We install and maintain heavy slide and swing gates, Class III and Class IV operators, barrier arms, and multi-user access control for food processing plants, dairies, distribution centers, truck yards, self-storage properties, apartment communities, and municipal sites across Stanislaus, San Joaquin, and Merced counties. Duty cycle drives every other decision.
- commercial security gates
- industrial gate installation
- food processing plant gate
- apartment complex gate
- self storage gate system
- truck yard gate
- class iv gate operator
- commercial gate maintenance contract
- high cycle gate operator
- gate access control commercial
- knox box gate requirement
- commercial gate repair
Farm & Ranch Gates
Farm and ranch gates are a different product from a residential driveway gate, and treating them as the same thing is how people end up with an expensive gate that does not work. We build ranch entrances, orchard access gates, livestock and pasture gates, and automated agricultural entries sized for a tractor and a trailer rather than for a sedan. Start with the honest distinction.
- farm gate installation
- ranch entrance gate
- livestock gate
- orchard gate
- tube gate installation
- automated ranch gate
- wide agricultural gate
- ranch entry with posts and columns
- pipe gate repair
- corral and pasture gates
- gate for tractor clearance
- solar ranch gate opener
Welding & Gate Fabrication
Not every job is a whole gate, and our shop takes the metalwork nobody else wants to bid. We fabricate and repair gate frames, hinge posts, columns, handrails, window guards, dumpster enclosure gates, equipment brackets, and agricultural hardware in steel and aluminum, with MIG and TIG welding, in-house blasting, and powder coat finishing on the same equipment we use for our own gates. Repair welding is the bulk of it.
- gate welding repair
- custom metal fabrication
- mobile welding gate
- steel gate frame repair
- hinge post replacement
- handrail fabrication
- window guard fabrication
- dumpster enclosure gate
- aluminum tig welding
- powder coating service
- farm equipment welding repair
- on site welding repair
What Modesto property owners ask us
Which gate services does Modesto Gate Pros handle?
Everything listed on this page, residential and commercial, across Modesto and the Central Valley. Work is done by our own crews rather than handed to whoever is cheapest that week, which is the only way the workmanship warranty means anything.
Can I combine more than one service in a single job?
Yes, and it is usually cheaper. Bundling gate work into one mobilization saves setup, disposal and travel, and it means one crew, one schedule and one written free estimate instead of three contractors blaming each other.
Do you give free estimates for every service?
Every one. We come out, measure, look at the real condition of the work area, and put an itemized free estimate in writing with materials and scope spelled out. No charge, no deposit, and no obligation to book.
What Modesto Customers Say
They built a 16-foot ranch entrance on a welded frame and set it up on solar since we have no power at the road. Two winters in and it has not missed a cycle. Everything explained in Spanish for my dad too.
Our old tube gate sagged so badly the latch had not lined up in years. They set new posts deep, built a rigid frame, and automated it. The gap is even top to bottom now and the tractor clears it fine.
We manage a processing yard and needed a cantilever gate that could take a truck cycle count. They sized the operator properly, put in loops, and gave us a written safety report. First company that measured before quoting.
The iron gate they built matches our porch rail almost exactly. They took a photo of the old pattern and reproduced it. Powder coat still looks new after a full year of sprinklers hitting it.
Operator board died during harvest week and they had it replaced the same day, then reprogrammed all the remotes and the keypad. They also found a photo eye that had never been wired right.
Got three bids for an automatic driveway gate. These were the only ones who checked the slope and the power at the gate first. No surprises on the invoice and the crew cleaned up after themselves.
Service Areas
Modesto Gate Pros serves Modesto, CA and surrounding communities including: